Shopping Cart
Wheel Spacers 25MM 6x139.7 95.1 M14х1.5 TOYOTA 25WSS.FA6-B.8116 buy in the online store ADAPTEX-SHOP.EU
Spacers require careful selection. Please read the offer carefully.
Characteristics
Quantity in set: 2 pcs.
Special nuts included: 12 pcs.
Spacer type: with pins
- A – Bolt pattern (PCD): 6x139.7
- F – Pin: M12 x 1.5
- ⌀ – Outer diameter: 176 mm
- S – Thickness (mm): 25
- D₁ – Outer diameter (mm): 106.1
- D₂ – Inner diameter (mm): 106.1
- Colour: matt black
- Material: aluminium
Manufacturer: GETMANN
Note: Please indicate the model and year of manufacture of your car in the comments section of your order. This will allow us to additionally check whether the selected spacers and nuts will fit.
Installation diagram for bolt-on spacers (with pins)
The spacer ② is clamped between the car hub ① and the rim ③ using special nuts ④, which are included in the set. The rim is attached to the spacer using standard nuts ⑤.
List of cars compatible with the installation of 25mm 6x139.7 106.1 M12x1.5 bolt-on spacers:
LEXUS▾
GX460 (2009 - )
GX470 (2002 - 2009)
TOYOTA▾
4 Runner (2003 - )
FJ Cruiser (2006 - )
Hi-Ace 2WD (1995 - 2001)
Hi-Ace 4WD (1989 - 1995)
HiLux 4WD (1989 - 1999)
HiLux 4WD (1999 - 2005)
HiLux 4WD (2006 - )
Land Cruiser J90 (1996 - 2002)
Land Cruiser Prado (2002 - 2009)
Land Cruiser Prado (2009 - )
Sequoia (2001 - 2007)
Tacoma (1995 - 2004)
Tundra (1999 - 2007)
The list assumes that the spacers will be mounted on the original (standard) alloy wheels. If the spacers are to be mounted on non-standard wheels for this car, individual selection of spacer parameters is required.
Due to the many unique vehicle and wheel configurations, this list cannot be 100% complete. Therefore, please ensure that the spacers and fasteners fit your vehicle and wheel configuration. Installation instructions are included with the kit.
DESCRIPTION
GETMANN wheel spacers are used to widen the wheelbase of a vehicle. By installing GETMANN spacers, you will achieve a more dynamic look for your vehicle and better control when driving.
GETMANN wheel spacers are manufactured from high-strength aluminium alloy with tight manufacturing tolerances on state-of-the-art CNC machines, ensuring exceptional wheel balance. A special anodised coating makes them more resistant to weather conditions and guarantees lasting protection against corrosion and a long service life.
The combination of these factors means that properly selected GETMANN wheel spacers will fit your car perfectly.
Regardless of the type of wheel fasteners (bolts or nuts), GETMANN offers suitable spacers for the vast majority of vehicles, which ensure a positive visual effect even when using standard rims.
Spacers are mounted using one of three systems (through-type, with sleeves or with pins). Regardless of the type of spacers installed, we recommend using only certified wheel mounting products.
The spacers are manufactured in accordance with international standards, including fasteners certified to UNI EN ISO 9001:2015. Full control over the production line guarantees exceptional attention to detail at all stages of production.
In our shop, you will find only high-quality products that meet all the quality standards necessary for the installation of spacers, which guarantees the safe operation of your car.
- Quantity
- 2 szt.
- Manufacturer
- GETMANN
- Category
- Wheel Spacers
- Thickness of a Single Spacer
- 25 mm
- Color
- Czarny
- Center Bore (mm)
- 95,1
- PCD
- 6x139.7
- Outer Diameter
- 176
- EAN Number
- 5906358367404
- Kod Producenta
- 25WSS.FA6-B.8116
- Stan
- Nowy
- Typ samochodu
- Samochody Osobowe
Online catalog GETMANN in the ADAPTEX online store
Tap to zoom
