Spacers require careful selection. Please read the offer carefully.
Characteristics
Quantity in set: 2 pcs.
Spacer type: through
- A – Bolt pattern (PCD): 4x108
- ⌀ – Spacer outer diameter: 140 mm
- S – Thickness (mm): 5
- D₁ – Outer diameter (mm): 65.1
- D₂ – Inner diameter (mm): 65.1
- Colour: grey
- Material: aluminium
Manufacturer: GETMANN
Please note that the installation of spacer rings requires replacing standard screws with longer ones. The diagram below shows how to install spacer rings.
Spacer ② is clamped between the car hub ① and the rim ③ using long screws ④.
In addition, GETMANN spacers have a centring flange for convenient installation and perfect balancing of all structural elements.
List of cars suitable for mounting 5MM 4x108 65.1 spacers:
CITROEN▾
AX ZA (1986 - 1998)
Berlingo M49, M59, B9, K9 (1996 - )
C2 JM (2003 - )
C3 A8, A51, A88 (2002 - )
C4 I, II B7, C41 (2006 - 2018)
C5 DC, DE (2000 - 2008)
DS3 S (2009 - 2016)
DS4 N (2010 - 2015)
Saxo S0 (1996 - )
Xantia X1, X2 (1993–present)
Xsara N1 (1997 - 2006)
ZX N2 (1990 - 1998)
OPEL▾
Crossland X P17 (2017 - 2020)
Corsa F (2019–present)
Mokka J, U (2020 - )
PEUGEOT▾
1007 KM (2004 - 2009)
106 S1, S2 (1991 - )
205 A, B (1983 - 1998)
206 T1 (1998 - 2010)
207 A7 (2006 - 2014)
208 A9, P21 (2012–2024)
3008 T84, P84 (2009 - 2019)
306 N3, N5 (1993–2002)
307 T5 (2001–2011)
308 T7 (2007–2015)
309 C1 (1985 - 1993)
405 D2, D3 (1987 - 1999)
406 D8, D9 (1995–2004)
5008 T87, P87 (2009–2016)
Partner M49, M59, B9, K9 (1996 - 2024)
VOLVO▾
850 ( 1993 - 1999)
S70 ( 1993–1998)
V70 ( 1993 - 2007)
The list assumes that the spacers will be mounted on original (standard) alloy wheels. If the spacers are to be mounted on non-standard wheels for this car, individual selection of spacer parameters is required.
Due to the many unique configurations of vehicles and rims, this list cannot be 100% complete. Therefore, please ensure that the spacers and fasteners fit your car and rims configuration. Installation instructions are included in the kit.
DESCRIPTION
GETMANN wheel spacers are used to widen the wheelbase of a vehicle. By installing GETMANN spacers, you will achieve a more dynamic look for your vehicle and better control when driving.
GETMANN wheel spacers are manufactured from high-strength aluminium alloy with tight manufacturing tolerances on state-of-the-art CNC machines, ensuring exceptional wheel balance. A special anodised coating makes them more resistant to weather conditions and guarantees lasting protection against corrosion and a long service life.
The company's employees have extensive experience gained from carrying out complex tasks in the field of motorsport, in such disciplines as drifting, drag racing, time attack, off-road and others.
The combination of these factors means that GETMANN wheel spacers, when properly selected, will fit your car perfectly.
Regardless of the type of wheel fasteners (bolts or nuts), GETMANN offers suitable spacers for the vast majority of vehicles, which ensure a positive visual effect even when using standard rims.
Spacers are mounted using one of three systems (through-type, with sleeves and with pins). Regardless of the type of spacers installed, we recommend using only certified wheel mounting products.
The spacers are manufactured in accordance with international standards, including fasteners certified to UNI EN ISO 9001:2015. Full control over the production line guarantees exceptional attention to detail at all stages of production.
In our shop, you will find only high-quality products that meet all the quality standards necessary for the installation of spacers, which guarantees the safe operation of your car.
- Quantity
- 2 szt.
- Manufacturer
- GETMANN
- Category
- Wheel Spacers
- Thickness of a Single Spacer
- 5 mm
- Center Bore (mm)
- 65,1
- PCD
- 4x108
- Outer Diameter
- 140
- Kod Producenta
- 5NS.CA.6369
- Stan
- Nowy
- Typ samochodu
- Samochody Osobowe